Modifications!

[David.H]

1, Probably trying to fix the castor angle, but a bit agricultural in my eyes!
2, Nobby spring assisters, they work.
3, 31ish the best of the SWB axle's, reasonable pinion support and you can fit easily fit later ratios into these.
4, Side screen strap with lift the dot is as expected, the stud must be simply missing, or I am misunderstanding the question?

The wheel centre is just a late Ruby one.

Thanks Ian.
1. My view also, I will leave well alone for the moment (I have to stop the steering box wobbling about....it seems to be mixed up with the brake master cylinder....!
2. Thanks, nor mattress springs then! Looks as if I will have to do a little remedial work on the floor there!
3. Good news
4. The mating studs are on the doors, the remark was following up the comments on another thread all about when Lit A Dot/Lift the Dot came into use. The car also has round press studs that have rather fancy milled flanges.
5. So I have 4 earlier and one later17" wheels!
David