02-12-2017, 08:21 PM
(02-12-2017, 07:07 PM)Erich Wrote: As I mentioned on another thread, I'm shipping my car to Seattle from the UK. I'm outfitting my trailer without the car so need a couple of dimensions. It is a SWB Ulster with a dropped front axle which was not stretched. I need the measurement from the center of front tyre to center of front tyre. I also need the same measurement at the rear(center of tyre to center of tyre). I had initial measurements of 39 inches for front and rear, but need to confirm. It would seem that with the non-stretched axle, the front dimension should be less than the measurement at the rear.Hi Eric,
Erich
I have an axle done without stretch. It has four sharper bends and is straighter across the middle. It has shortened the axle length by one and a quarter inches.
I would not count on yours being exactly the same but this may help.
Think I have managed to insert a photo.
Bruce