27-02-2020, 03:22 PM
I'm trying to get a way of having a clear loadbay bed in the back of the woodie, but yet I am advised that the top board over the spare wheel and wooden subframe should be fixed securely enough to act as a brace for the frame. As I want to be able to access underneath, I dont want to screw it down as this will just gradually wear the wood hole if its opened every few months. I also dont want to drill through the structural members (only of about 2" x 1 3/4") if at all possible.
Dzus 1/4 turn fasteners do a rare bracket which can fasten onto the side of a wooden member, but does anyone have an suggestions as to whether they would give enough tension for it to be structural... or indeed for a cheaper way of doing it with more easily-found fittings...?
Dzus 1/4 turn fasteners do a rare bracket which can fasten onto the side of a wooden member, but does anyone have an suggestions as to whether they would give enough tension for it to be structural... or indeed for a cheaper way of doing it with more easily-found fittings...?