23-02-2020, 10:49 PM
It's very likely that the stud in the cylinder head is corroded and weak.
From your description it seems a new new water outlet will be needed so perhaps just cut the aluminium outlet down beside the stud. A couple of cuts should release it. The stud and head can then be inspected.
The whole of this area can be fragile.
From your description it seems a new new water outlet will be needed so perhaps just cut the aluminium outlet down beside the stud. A couple of cuts should release it. The stud and head can then be inspected.
The whole of this area can be fragile.
Jim