23-02-2020, 06:59 PM
I take it we are talking about a low compression head (single bolt fixing)?
The thing to be careful of is stripping out or breaking the iron 'strap' in the head casting which the stud is threaded into.
As for the ally manifold, I'd point a blowtorch at it for a minute or so. They are readily replaceable if it goes bad.
The thing to be careful of is stripping out or breaking the iron 'strap' in the head casting which the stud is threaded into.
As for the ally manifold, I'd point a blowtorch at it for a minute or so. They are readily replaceable if it goes bad.