Hi have stripped off manifold, checked all surfaces are level with steel rule, gasket o.k., reassembled with the carb which has been reconditioned, problem still exists it will not rev it just dies. It has electronic ignition fitted don't know if there is a problem there. Getting at a bit of a loss as where to look next, Thanks Mike.
|
carbs
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
RE: carbs - by Dave Wortley - 30-01-2020, 06:47 PM
RE: carbs - by Barry Townsend - 30-01-2020, 07:09 PM
RE: carbs - by John Mason - 30-01-2020, 08:48 PM
RE: carbs - by Steve Jones - 30-01-2020, 09:11 PM
RE: carbs - by Ian Williams - 31-01-2020, 07:20 PM
RE: carbs - by Hobbo - 22-02-2020, 06:09 PM
RE: carbs - by AustinWood - 22-02-2020, 06:26 PM
RE: carbs - by Ian Williams - 22-02-2020, 08:53 PM
RE: carbs - by Ian Williams - 23-02-2020, 08:08 PM
RE: carbs - by AustinWood - 24-02-2020, 10:09 AM
RE: carbs - by Ivangardiner - 27-02-2020, 10:48 PM
RE: carbs - by Tony Press - 28-02-2020, 01:24 AM
RE: carbs - by John Mason - 04-03-2020, 02:09 PM
RE: carbs - by Ian Williams - 05-03-2020, 02:31 AM
RE: carbs - by David Stepney - 05-03-2020, 01:29 PM
RE: carbs - by AustinWood - 05-03-2020, 04:23 PM
RE: carbs - by Nick Salmon - 05-03-2020, 04:44 PM
RE: carbs - by Colin Reed - 05-03-2020, 08:46 PM
RE: carbs - by Ian Williams - 05-03-2020, 10:49 PM
RE: carbs - by John Mason - 06-03-2020, 07:02 PM
RE: carbs - by Ian Williams - 06-03-2020, 09:12 PM
|
Users browsing this thread: 9 Guest(s)