22-02-2020, 03:02 PM
How about this solution.
I had an old damaged wheel so used that. Cut down spokes, rim made with 27mm OD x 3mm wall aluminium tubing rolled into circle then welded to spokes. In this case the wheel OD is 13.5" but could easily be 14" or whatever. I dont need the center levers so turned up a blanking piece but you could just as easily put the levers back.
Surprising thing is hardly anyone notices my wheel is much smaller.
I had an old damaged wheel so used that. Cut down spokes, rim made with 27mm OD x 3mm wall aluminium tubing rolled into circle then welded to spokes. In this case the wheel OD is 13.5" but could easily be 14" or whatever. I dont need the center levers so turned up a blanking piece but you could just as easily put the levers back.
Surprising thing is hardly anyone notices my wheel is much smaller.