07-02-2020, 09:59 AM
(This post was last modified: 07-02-2020, 10:05 AM by Mark McKibbin.)
(06-02-2020, 10:46 PM)Austin in the Shed Wrote: Measured from my chummy the hole is 8" in from o/s of dash and 4 7/8" up vertically from bottom edge of dash.If you get stuck I could help with a reconditioned round oil button.
I assume it's centred on the steering column?
(07-02-2020, 01:56 AM)Tony Press Wrote: You can also with a bit of fiddling get a Lucas SM3 switchboard to operate a coil ignition engine.
I will lookout for an SM3 and give it a shot, I assume the SM3 puts an earth on the maggy to stop whereas the SM5 puts battery on the coil to go.
(06-02-2020, 03:50 PM)Robert Leigh Wrote: Here is slightly poor picture of our early'28 layout, with contemporary dash light and underdash lidded cubby holes. I believe the original bits are how yours should be.
Robert Leigh
I like the cubby holes, desperately needed as I don't even have door pockets.
Cheers
Mark
Mark