27-01-2020, 10:57 PM
Bulge is not really the answer, the area where the accelerator needs to be fitted is adjacent to the wooden scuttle hoop strengthener.
If a bulge was to be fitted through metal work it would be 4inch's further away from the brake pedal towards the driver.
I have no objection to a bulge but moving the accelerator pedal 4 inches closer to the driver gives an uncomfortable leg angle, the purpose was to try and get all pedal horizontally aligned, dare I say it like a modern car!
If a bulge was to be fitted through metal work it would be 4inch's further away from the brake pedal towards the driver.
I have no objection to a bulge but moving the accelerator pedal 4 inches closer to the driver gives an uncomfortable leg angle, the purpose was to try and get all pedal horizontally aligned, dare I say it like a modern car!