29-11-2017, 11:22 PM
When I said I wouldn't I was warning against the notion that it could be a good idea, rather than suggesting it was necessary! Points taken.
I'm with Alan & Bob on sintered materials - not knocking Oilite but these materials are inherently brittle. That's fine in an installation which is designed with such characteristics in mind. Come to that, needle rollers don't tend to fare too well in applications where they are static and subject to vibration. That's my two penn'orth...
I'm with Alan & Bob on sintered materials - not knocking Oilite but these materials are inherently brittle. That's fine in an installation which is designed with such characteristics in mind. Come to that, needle rollers don't tend to fare too well in applications where they are static and subject to vibration. That's my two penn'orth...