19-01-2020, 10:43 AM
My engine has plain front and rear bearings as per Chris Gould's engine. It also had the Reliant crank machined to take the Austin flywheel.
I remember that the crank balancing was carried out by a small Midlands engineering firm who had done Nigel Mansell's Championship winning Williams F1 engine at around the same time. That must have been in the late 1980's.
I remember that the crank balancing was carried out by a small Midlands engineering firm who had done Nigel Mansell's Championship winning Williams F1 engine at around the same time. That must have been in the late 1980's.