14-01-2020, 09:47 PM
(This post was last modified: 16-01-2020, 11:51 AM by Colin Wilks.)
I am reworking the camshaft fixing bolt on my bog standard splash fed '33 RP.
The standard oil way drilling in the bush is 3/16" (assuming mine is a standard item). I have been advised that 1/32" is a better size for this oil way, which seems mighty small to me.
Interested to know other's custom and practice before I start drilling. I plan to have a standard assembly, so will not be embedding o rings fore and aft. End float will be approx .001".
The standard oil way drilling in the bush is 3/16" (assuming mine is a standard item). I have been advised that 1/32" is a better size for this oil way, which seems mighty small to me.
Interested to know other's custom and practice before I start drilling. I plan to have a standard assembly, so will not be embedding o rings fore and aft. End float will be approx .001".