The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.31 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Big end nuts
#5
Nylocs working range is up to about 120C IIRC. Use some Loctite Nutlock as well if you want some extra confidence; that has a working temperature that goes up to 150ish C. As Ruairidh says, there must be hundreds if not thousands of motors built with Nyloc nuts retaining big end caps which are still running without issues.

Finding Binx, Philedas, Aerotight, Dotloc or Stenor all metal locknuts in BSF sizes now is likely to be a mission, as they are pretty well certain to be old stock that's been sitting on a shelf somewhere for several decades.
Reply


Messages In This Thread
Big end nuts - by Howard Wright - 07-01-2020, 09:03 PM
RE: Big end nuts - by Ruairidh Dunford - 07-01-2020, 09:39 PM
RE: Big end nuts - by Chris KC - 07-01-2020, 11:42 PM
RE: Big end nuts - by Colin Reed - 08-01-2020, 02:44 AM
RE: Big end nuts - by Stuart Giles - 08-01-2020, 03:05 PM
RE: Big end nuts - by Colin Wilks - 08-01-2020, 05:44 PM
RE: Big end nuts - by Zetomagneto - 08-01-2020, 06:31 PM
RE: Big end nuts - by Alan - 08-01-2020, 06:51 PM
RE: Big end nuts - by Chris KC - 08-01-2020, 09:39 PM
RE: Big end nuts - by Howard Wright - 09-01-2020, 08:35 AM
RE: Big end nuts - by Howard Wright - 04-02-2020, 07:21 PM
RE: Big end nuts - by Chris KC - 04-02-2020, 08:27 PM
RE: Big end nuts - by Hugh Barnes - 04-02-2020, 09:11 PM
RE: Big end nuts - by Howard Wright - 04-02-2020, 09:44 PM
RE: Big end nuts - by Ruairidh Dunford - 04-02-2020, 10:03 PM
RE: Big end nuts - by Howard Wright - 04-02-2020, 10:36 PM
RE: Big end nuts - by Colin Wilks - 04-02-2020, 10:46 PM
RE: Big end nuts - by Bob Culver - 04-02-2020, 10:58 PM
RE: Big end nuts - by Charles P - 04-02-2020, 11:43 PM
RE: Big end nuts - by Zetomagneto - 05-02-2020, 10:45 AM
RE: Big end nuts - by Bob Culver - 05-02-2020, 07:58 PM
RE: Big end nuts - by Howard Wright - 06-02-2020, 08:52 AM
RE: Big end nuts - by Chris KC - 06-02-2020, 10:36 AM
RE: Big end nuts - by Colin Wilks - 07-02-2020, 10:52 AM
RE: Big end nuts - by Colin Wilks - 07-02-2020, 06:27 PM
RE: Big end nuts - by Howard Wright - 07-02-2020, 07:36 PM
RE: Big end nuts - by David.H - 07-02-2020, 11:32 PM

Forum Jump:


Users browsing this thread: 3 Guest(s)