28-12-2019, 06:49 PM
Thanks all
Particularly Alan who pointed out that the float chamber was too high. I’ve made a new long banjo bolt for the float chamber and will fit a 1” tubular spacer to make the float level about the same height as the top of the jet. I can adjust the height by changing the spacer once I get the car running.
The lower float chamber also allows me to use of the fast idle mechanism
.
I can make an aluminium shield and stick heat shield material on it.
Cheers
Howard
Particularly Alan who pointed out that the float chamber was too high. I’ve made a new long banjo bolt for the float chamber and will fit a 1” tubular spacer to make the float level about the same height as the top of the jet. I can adjust the height by changing the spacer once I get the car running.
The lower float chamber also allows me to use of the fast idle mechanism
. I can make an aluminium shield and stick heat shield material on it.
Cheers
Howard