18-12-2019, 04:08 PM
(This post was last modified: 18-12-2019, 04:12 PM by Ian McGowan.)
(18-12-2019, 02:03 PM)JonE Wrote: ...I wonder what it's been cleaned up with - perhaps a 14TPI BSF? Would the difference between 14 and 16TPI provide 'ambiguity' and perhaps permit either to fit if forced?Wishful thinking I fear, Jon
Why not buy a front stub-axle castellated nut from any of our cherished suppliers and use that as your "standard". any stub axle that doesn't fit that is either not an A7 or, its been buggered about with!!
Sadly, the world is full of people who are capable of "cross-threading" even parts that would normally unite without problem; let alone force 14TPI and 16TPI to mate as it were.