26-11-2017, 10:54 AM
Thanks.
I've made some slappers from old Morris springs polished up. The slapper spends more time re stretching the metal and little on pushing the low spots out. I'm using my anvil as a dolly and slapping from the inside surface to push the material of the low spots outwards. I'll try a small ball hammer again and see if I can lift the low spots outwards. It is only the second set I've made so am still learning how to 'move metal'.
I've made some slappers from old Morris springs polished up. The slapper spends more time re stretching the metal and little on pushing the low spots out. I'm using my anvil as a dolly and slapping from the inside surface to push the material of the low spots outwards. I'll try a small ball hammer again and see if I can lift the low spots outwards. It is only the second set I've made so am still learning how to 'move metal'.