08-12-2019, 03:04 PM
Hi and thanks to everyone who gave an opinion or advice on the Dynamotor. This website is just great.
Since I've installed the unit I'm still finding the drive a bit noisy despite using the original gear - any suggestions.
Also the charge rate never falls below about 9/10 amps at normal revs, that seems to be a bit on the high side to me. It shows around 15 amps after starting and the drops to the 9/10 amps.
The battery is a new one.
The ammeter hardly changes if I put the headlights fully on.
I'm a bit worried about boiling the battery if it's overcharging
Typical of messing with anything mechanical, solve one problem and create another!
Since I've installed the unit I'm still finding the drive a bit noisy despite using the original gear - any suggestions.
Also the charge rate never falls below about 9/10 amps at normal revs, that seems to be a bit on the high side to me. It shows around 15 amps after starting and the drops to the 9/10 amps.
The battery is a new one.
The ammeter hardly changes if I put the headlights fully on.
I'm a bit worried about boiling the battery if it's overcharging
Typical of messing with anything mechanical, solve one problem and create another!
Buy an Austin 7 they said, It's easy to work on they said !