26-11-2019, 01:45 AM
HI Rodger,
As Tony has said not the rods,
I would suspect Crank has not been setup Properly for centre line for 1&4 ,
A lot just use a V block to centralise when setting on grinder so easy to get 20 thou out.
Cheers
Colin
NZ
As Tony has said not the rods,
I would suspect Crank has not been setup Properly for centre line for 1&4 ,
A lot just use a V block to centralise when setting on grinder so easy to get 20 thou out.
Cheers
Colin
NZ