23-11-2019, 05:26 PM
Hi All
Just a quick update and a question regarding mudguard clearance.
I’ve mounted the lights on the scuttle and spent ages beating aluminium to form the mudguards (and yes Duncan I did use filler).
I’ve also sprayed all the internal floor panels.
The front mudguards are attached to the hubs via three, 3/8” tubes bolted to the brake backplate holes (opened up to take 1/4” countersunk bolts). I’ve left a good 3” clearance here to allow for any mud build up.
The rear guard is propped in position to let me see how it looks while I devise suitable supports. I’ve allowed about 7” above the tyre. Is this enough?
Cheers
Howard
Just a quick update and a question regarding mudguard clearance.
I’ve mounted the lights on the scuttle and spent ages beating aluminium to form the mudguards (and yes Duncan I did use filler).
I’ve also sprayed all the internal floor panels.
The front mudguards are attached to the hubs via three, 3/8” tubes bolted to the brake backplate holes (opened up to take 1/4” countersunk bolts). I’ve left a good 3” clearance here to allow for any mud build up.
The rear guard is propped in position to let me see how it looks while I devise suitable supports. I’ve allowed about 7” above the tyre. Is this enough?
Cheers
Howard