15-11-2019, 12:11 PM
(14-11-2019, 11:08 PM)Tony Griffiths Wrote: I may, just possibly, have a collet chuck with your fitting. Do you have the basic dimensions: minimum and maximum diameters and the length of the taper?
Hi Tony,
Here's a drawing I did of it, years ago. It's midway between 30INT and 40INT, 1 3/8" is very nearly 35mm.
![JPG Image .jpg](https://www.austinsevenfriends.co.uk/forum/images/attachtypes/image.png)
Thanks!
Tim Reynolds