11-11-2019, 12:17 PM
Any recommendations for getting a fuel tap to seal? Its a new pivotting one for a chummy tank and is both stiff and leaky, so not great!
I don't want to fit a modern tap but have seen recommendations for blue hylomar, a very expensive petrol resistant grease or tinning the inside of the tap with solder. Has anyone tried any of these approaches. According to the complete automobilist site neither the pivotting or push pull ones with cork seals work well with modern fuel.
I don't want to fit a modern tap but have seen recommendations for blue hylomar, a very expensive petrol resistant grease or tinning the inside of the tap with solder. Has anyone tried any of these approaches. According to the complete automobilist site neither the pivotting or push pull ones with cork seals work well with modern fuel.