09-11-2019, 09:59 AM
Hi Steve,
There's quite a bit of material around the big ends but not much at the little ends. Depending how close they are I would suggest you balance to the second lightest rod and try to add to the lightest by trying different gudgeon pins - there is variance of a few grams amongst different batches depending on how big the hole is made. Fine adjustments come from a washer under the big end nuts and varying the clamp bolt length. It is possible to get within a few grams on this but you need lots of patience and keep rechecking your measurements for consistency.
Hope of use, Dave
There's quite a bit of material around the big ends but not much at the little ends. Depending how close they are I would suggest you balance to the second lightest rod and try to add to the lightest by trying different gudgeon pins - there is variance of a few grams amongst different batches depending on how big the hole is made. Fine adjustments come from a washer under the big end nuts and varying the clamp bolt length. It is possible to get within a few grams on this but you need lots of patience and keep rechecking your measurements for consistency.
Hope of use, Dave