Bonnet alignment

[Colin Wilks]

There is a gap at rear edge of the bonnet as you will see in the first pic. The second pic shows that the stone guard is off centre where the starting handle goes through. The front of the bonnet is correctly lined up, i.e. it doesn't overlay the edge of the radiator surround, although it could pull back the necessary amount without causing a major issue.

For starters I am inclined to just slacken everything off and wiggle it all about, but suspect that getting one bit right will put another bit out.

All bright ideas gratefully received.

You may notice the nearside headlight is out of alignment. I have adjusted this at the headlight mounting since the pic was taken, although the nearside mudguard does still appear a little higher than its opposite number.