30-10-2019, 10:03 AM
There are a number of good bits of information on nosepieces and castor. This thread has a good title so asking this here! The Bowring article has discussion of the returning to a good surface of the nosepiece underside which respects the angle/plane first made by Austin. http://www.austin7club.org/How%20To%206.htm
1. As someone about to investigate what could be a potentially worn nosepiece before re-assembly, is it good advice, or is there other out there? i.e for someone considering just keeping a standard spec.
2. I can see the other discussion about wedges for using combinations of non-standard parts, but not sure whether these prescriptions naturally overcome any wear in the nosepiece by bridging that area of wear?
1. As someone about to investigate what could be a potentially worn nosepiece before re-assembly, is it good advice, or is there other out there? i.e for someone considering just keeping a standard spec.
2. I can see the other discussion about wedges for using combinations of non-standard parts, but not sure whether these prescriptions naturally overcome any wear in the nosepiece by bridging that area of wear?