25-10-2019, 11:26 PM
Ray,
I have a Wolf as well, and made two mods:
1) Outlet directly from the front of the tank to permanent 15mm copper piping around the Carport and into the Workshop, with full 100 PSI regulated/filtered at each of the 3 outlets.
2) Outlet from the compressor now through a cooler of 20mm copper tubing, looped in front of the cooling fan guard, then into the tank via a water separator, result near cold air and NO condensation in the tank, where beforehand had to open the drain regularly.
Geoff - Those compressors are nice and quiet.
I have a Wolf as well, and made two mods:
1) Outlet directly from the front of the tank to permanent 15mm copper piping around the Carport and into the Workshop, with full 100 PSI regulated/filtered at each of the 3 outlets.
2) Outlet from the compressor now through a cooler of 20mm copper tubing, looped in front of the cooling fan guard, then into the tank via a water separator, result near cold air and NO condensation in the tank, where beforehand had to open the drain regularly.
Geoff - Those compressors are nice and quiet.