17-10-2019, 09:55 PM
Hi Steve
Don't be afraid of making your own using silicone baking sheet material. It's very stable and take about 20 minutes to carefully cut out with a sharp scalpel (no.11blade for precision), and find somewhere where you can't be interrupted! Total cost of material is about £1.50, and you should have plenty of spare for other gaskets.
Not recommended for head gaskets for obvious reasons but it makes an excellent sump gasket,
I've been using it for several years, and can recommend it. Mind you Seven workshop's sump gasket is thicker and superior! And more expensive.
Good luck if you try it
Bob
Don't be afraid of making your own using silicone baking sheet material. It's very stable and take about 20 minutes to carefully cut out with a sharp scalpel (no.11blade for precision), and find somewhere where you can't be interrupted! Total cost of material is about £1.50, and you should have plenty of spare for other gaskets.
Not recommended for head gaskets for obvious reasons but it makes an excellent sump gasket,
I've been using it for several years, and can recommend it. Mind you Seven workshop's sump gasket is thicker and superior! And more expensive.
Good luck if you try it
Bob