(16-10-2019, 01:21 PM)Colin Wilks Wrote: Using glue rather than gasket material seems sensible as it spreads the loads trying to separate the block from crankcase beyond the studs.
The blurb on the Three Bond site http://www.threebond.com.my/product/thre...ne-gasket/ doesn't mention subsequent disassembly. Would value the experts comments on this aspect.
Threebond 1215 grips well but it is reasonably simple to break apart. Easier than Loctite 515.
It's a very good gasket sealant/replacement
Charles