06-10-2019, 07:10 PM
(This post was last modified: 06-10-2019, 07:10 PM by Hedd_Jones.)
be easy enough to cast a silicone mould from an exisiting lense.
Then liberate the bronze thready bit and cast a clear one in resin.
Might be easier to turn one on a lathe from a lump of clear resin however. Then glue in the thread.
Then liberate the bronze thready bit and cast a clear one in resin.
Might be easier to turn one on a lathe from a lump of clear resin however. Then glue in the thread.