10-09-2019, 07:16 PM
I connected a shock absorber arm directly to the axle on my Nippy. It worked very well especially because with the lowered axle beam the arm lines up with the axle fixing. I reinforced the flat steel arm by welding a tube between the 2 parts into which I fitted a rubber bush.
On my 1929 saloon I have rubber block in the shackles locating the axle laterally. That is very simple and very effective.
On my 1929 saloon I have rubber block in the shackles locating the axle laterally. That is very simple and very effective.
Jim