12-11-2017, 10:10 AM
(10-11-2017, 07:51 PM)Ian Williams Wrote: I agree with almost all of the above and like Ruairidh have found this issue linked to the radius arm ball, in my case the brass cups, through wear, were a poor fit in the radius arms allowing movement, rectifying this cured the problem.
(10-11-2017, 07:57 PM)Nigel was in Brittany Wrote: I have the same problem on my RN, it's not going forward, its going in reverse I get the juddering. The problem I get going forward is the N/s locks up on full lock. It's in the garage now on stands so I can investigate the problem.
It's been said before but check your cotter pin nuts are to the front. I ran my special for years with the front cotters wrong way round and put up with locking up in reverse thinking it was just an Austin Seven foible.
Charles