Hi Guys, Advice please is my A7 ac lever all but worn out. The other lever in pic is on an old AC, type T but not an Austin Seven wrong angle. The pin on the arm Sheared whilst turning the engine over.
If this lever is knackered I'm in need of another if someone trade or private could help me or point me in the right direction.
So many times others say don't fix what's not broken, only removed it because small oil run from the bottom which I thought I would correct with paper gasket, which turned into a pain in the Axx.
Thanks, everyone
Rob
Great little gadget Colin, I do need to get visual aspect on relation to the cam and wall of the crankcase, I'm doing something wrong when fitting. then need to sort that dangerous drip on carb. will wait till pump is ok then tackle the reason sadly no mainspring in my spare AC.
rob