22-08-2019, 05:38 AM
Hello Adrian,
thank you for your reply and the link. I have already checked the internet for suitable leathers, but could not find any suitable seals. Obviously it makes a huge difference to use metric or imperial sizes. I am absolutely not used to UK measurements... really time-consuming to figure it out. I know that the size of the brass tube is 38 mm on the outside. The seals CP630 (1 3/8") would be 35 mm. Theoretically 3 mm are missing. When you inserted the seals, were they tight or loose or did the oil or grease expand the seals? I will certainly contact your supplier, so thank you for the information... would have never found it. Once again a huge step ahead.
Thank you and regards
Frank
thank you for your reply and the link. I have already checked the internet for suitable leathers, but could not find any suitable seals. Obviously it makes a huge difference to use metric or imperial sizes. I am absolutely not used to UK measurements... really time-consuming to figure it out. I know that the size of the brass tube is 38 mm on the outside. The seals CP630 (1 3/8") would be 35 mm. Theoretically 3 mm are missing. When you inserted the seals, were they tight or loose or did the oil or grease expand the seals? I will certainly contact your supplier, so thank you for the information... would have never found it. Once again a huge step ahead.
Thank you and regards
Frank