20-08-2019, 05:15 PM
(This post was last modified: 20-08-2019, 05:16 PM by AllAlloyCup.)
Thanks all ... I knew it wouldn’t be easy!!!
I’m sure I fitted my TR3A Moto-Lita wheel on
My A7 column a couple of years back to check that
the steering box worked when I was building it up
around a new cast casing.
I’m pretty certain the TR3A and classic minis have
48 splines and OD 3/4” and the article above
Quotes the A7 at 50 splines and 22.5mm....
So my recollection may be correct?
I have access to a Mini Cooper wheel so will
borrow that this week.
Mini bosses are dirt cheap £20 and I’m sure I can persuade
Neil to machine a Mini boss down should the homemade tool
idea not be feasible?
I’m sure I fitted my TR3A Moto-Lita wheel on
My A7 column a couple of years back to check that
the steering box worked when I was building it up
around a new cast casing.
I’m pretty certain the TR3A and classic minis have
48 splines and OD 3/4” and the article above
Quotes the A7 at 50 splines and 22.5mm....
So my recollection may be correct?
I have access to a Mini Cooper wheel so will
borrow that this week.
Mini bosses are dirt cheap £20 and I’m sure I can persuade
Neil to machine a Mini boss down should the homemade tool
idea not be feasible?
Based near the Scottish Border,