10-08-2019, 09:51 AM
Soldering the tank should not be too difficult Bill. If you are using a heavy duty electric soldering iron
(350 W. min) there should be no danger of ignition. Clean well and a strong acidic flux should do it.
If using gas then purge the tank with the exhaust from a running engine which will replace any oxygen with carbon monoxide.
Or if you have a mind to venture southwards bring it here and I'll do it for you with pleasure.
(350 W. min) there should be no danger of ignition. Clean well and a strong acidic flux should do it.
If using gas then purge the tank with the exhaust from a running engine which will replace any oxygen with carbon monoxide.
Or if you have a mind to venture southwards bring it here and I'll do it for you with pleasure.