torque settings

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Linear Mode

torque settings

Tony Press Offline

Older Member

Joined: Aug 2017 Posts: 1,746 Threads: 42
Reputation: 15
Location: Malvern, Victoria, Australia

#14

07-08-2019, 11:31 PM

" Fronts I don't know, I probably do 50, and the split pins. "

The front hub stub axle nut only stops the hub from coming off so doesn't need heavy tightening - as long as the nut is a little more than finger tight and the split pin fitted it will be good.
Being two ball bearings there will always be some hub movement and overtightening does nothing.

http://austin7club.org

« Next Oldest | Next Newest »

Messages In This Thread

torque settings - by AlanCooper - 06-08-2019, 08:49 PM

RE: torque settings - by Jack in the Box - 06-08-2019, 09:18 PM

RE: torque settings - by Chris KC - 06-08-2019, 10:14 PM

RE: torque settings - by Bob Culver - 07-08-2019, 02:10 AM

RE: torque settings - by "Slack Alice" Simon - 07-08-2019, 04:51 PM

RE: torque settings - by Colin Wilks - 07-08-2019, 05:14 PM

RE: torque settings - by Ruairidh Dunford - 07-08-2019, 05:22 PM

RE: torque settings - by Chris KC - 07-08-2019, 06:30 PM

RE: torque settings - by Colin Wilks - 07-08-2019, 06:41 PM