07-08-2019, 02:10 AM
(This post was last modified: 07-08-2019, 09:59 AM by Bob Culver.)
This topic recurrs. Seven studs are thin and typically rusted in so replacement when snapped off is a saga.
It is questionable if original studs are more ht than ht hardware bolts, 45 tsi. Any torque beyond that recommended for normal ht hardwre is pushing luck, esp on old stretched studs
One of the Club sites gives/gave a grossly wrong figure for head studs.
It is questionable if original studs are more ht than ht hardware bolts, 45 tsi. Any torque beyond that recommended for normal ht hardwre is pushing luck, esp on old stretched studs
One of the Club sites gives/gave a grossly wrong figure for head studs.