27-07-2019, 01:36 PM
An ammeter will only read the current flowiing in the circuit it is connected in. The voltage applied to that circuit determines how much current will flow and consequently measured by the ammeter which is connected in series.
The only parameter you need to worry about is the full scale deflection of the ammeter (for example 16-0-16 Amps) not the voltage applied to the circuit itself.
Good luck with the rewire.
The only parameter you need to worry about is the full scale deflection of the ammeter (for example 16-0-16 Amps) not the voltage applied to the circuit itself.
Good luck with the rewire.