22-07-2019, 09:14 PM
(This post was last modified: 22-07-2019, 09:16 PM by Hedd_Jones.)
The last couple of evenings I thought id better give two of my sevens some TLC as we are off to Audlem this coming Sunday. One of the only shows I exhibit the cars.
Daughters RP. And my chummy.
Trouble is my chummy runs superbly, but the swine keeps conking out with no fuel in the bowl. I had wondered about a vapour lock and have wrapped the exhaust, but that didnt help. Nor did removing the filter, nor blowing up the pipe as suggested by the bearded wizzard.
Tonight I put the carb off my grey saloon on it. And its fixed. So thr chummys carb needs a dose of looking at this next week so i can get the grey one back on the road. The rist horn has list its honk so I fixed that, and the drivers side headlamp went limp. So it got a dose of the spanner. I put the fuel filter back on too
I also aquired another exhaust whistle which should be more suitable. I shall have to unwrap the exhaust now!
Hopefully all ready now.
A question. Should my fan spindle be longer to bring the fan nearer the rad core?
![[Image: 008_1778.jpg]](http://www.steamscenes.org.uk/tti/14/008_1778.jpg)
![[Image: 008_1779.jpg]](http://www.steamscenes.org.uk/tti/14/008_1779.jpg)
![[Image: 008_1780.jpg]](http://www.steamscenes.org.uk/tti/14/008_1780.jpg)
Daughters RP. And my chummy.
Trouble is my chummy runs superbly, but the swine keeps conking out with no fuel in the bowl. I had wondered about a vapour lock and have wrapped the exhaust, but that didnt help. Nor did removing the filter, nor blowing up the pipe as suggested by the bearded wizzard.
Tonight I put the carb off my grey saloon on it. And its fixed. So thr chummys carb needs a dose of looking at this next week so i can get the grey one back on the road. The rist horn has list its honk so I fixed that, and the drivers side headlamp went limp. So it got a dose of the spanner. I put the fuel filter back on too
I also aquired another exhaust whistle which should be more suitable. I shall have to unwrap the exhaust now!
Hopefully all ready now.
A question. Should my fan spindle be longer to bring the fan nearer the rad core?
![[Image: 008_1778.jpg]](http://www.steamscenes.org.uk/tti/14/008_1778.jpg)
![[Image: 008_1779.jpg]](http://www.steamscenes.org.uk/tti/14/008_1779.jpg)
![[Image: 008_1780.jpg]](http://www.steamscenes.org.uk/tti/14/008_1780.jpg)
![[Image: 008_1781.jpg]](http://www.steamscenes.org.uk/tti/14/008_1781.jpg)