16-07-2019, 12:32 AM
It fits into the groove of the chromed frame to the windscreen glass, you need to get the profile the right way round as it could go inside out, not that it makes much difference as in my experience the seals that have been available are not that good reproductions of originals.
The free ends need to be glued together to form a continuous seal and if there are shaped corners, they need to be fitted, the corners can pucker up, so will need to be stretched to get a decent curve, don't be surprised if you don't get a good seal to start with.
Good luck with this!
The free ends need to be glued together to form a continuous seal and if there are shaped corners, they need to be fitted, the corners can pucker up, so will need to be stretched to get a decent curve, don't be surprised if you don't get a good seal to start with.
Good luck with this!