12-08-2017, 02:27 PM
The pin should come out from either side. It should be a nice sliding fit through a bronze bush. If someone didn't ream the bush properly then it may be wedged in place?
As for the leaning, check that one of the U bolts that holds the front spring in place hasn't broken or that the spring isn't located correctly on the chassis. Also, check that the front axle beam isn't broken, bent or split?
Is there excessive play in the kingpin making the front stub axle loose?
As for the leaning, check that one of the U bolts that holds the front spring in place hasn't broken or that the spring isn't located correctly on the chassis. Also, check that the front axle beam isn't broken, bent or split?
Is there excessive play in the kingpin making the front stub axle loose?