09-06-2019, 11:20 AM
As you reported that the rear shockers were overtightened do make sure that the bracket rivets to the chassis are absolutely tight.
You can obtain all the parts including new springs so I would recondition the lot.
The the setting of the spring tension is important, I set mine by using a spring balance on the end of the lever and find that 12lb just moving the lever seems to give good results.
Do not overtightened.
Hope that helps.
You can obtain all the parts including new springs so I would recondition the lot.
The the setting of the spring tension is important, I set mine by using a spring balance on the end of the lever and find that 12lb just moving the lever seems to give good results.
Do not overtightened.
Hope that helps.