24-05-2019, 02:22 PM
I love the crankshaft mounting for the single seater.
The Alpha is two raised shells soldered together, no chassis at all. The bottom is two slim pointed canoe ends meeting at a 22mm copper pipe soldered into the body forward of centre with a couple of marbles and lots of grease as the bearing.
The louvres were made from strips fed through the gears on a swager
The Alpha is two raised shells soldered together, no chassis at all. The bottom is two slim pointed canoe ends meeting at a 22mm copper pipe soldered into the body forward of centre with a couple of marbles and lots of grease as the bearing.
The louvres were made from strips fed through the gears on a swager