All Alloy Cup progress

[AllAlloyCup]

  E09A1662-3374-4463-817D-5EC76894366D.jpeg (Size: 112.78 KB / Downloads: 439)
  A888B2D3-5C98-4772-9E6D-C58B1758E3D1.jpeg (Size: 75.62 KB / Downloads: 438)

The Lucas control panel is now fully functional 
And works the sidelamps and headlamps.

Wanted a change from electrics so worked 
On some mechanical bits .

Refitted the ash wood bonnet rest and wired in the
The rear rubber bonnet rest and alloy tank surround.

Trial fitted the petrol tank with its filter and tap
which needed a small depression made in the forward alloy bulkhead.

Also drilled a hole in the transmission tunnel to pass through 
the speedo cable from the gearbox to the speedo head.

Still to make the exhaust downpipe so filled up a suitable length of 
straight piping with water and then filled it with sand.

Hope to visit my pal Peter, who has a hydraulic pipe bender, tomorrow.

Also fitted the cast alloy valve chest cover , carb etc and fan belt
And hoses.

So steady progress , apart from the rad shell.

Regards

Bill G

Ps managing to find all the bits needed despite the chaos of the workbenches
just now, so will need to take timeout to tidy up!

Aka AllAlloyCup