11-05-2019, 09:54 PM
Good thought David... Flipping them over won't help though as they will still move sideways into the grooves...
Andrew, it's the top half of the pump I need. It's been a month or three since I rebuilt the pump and it seemed to be ok, but from memory, there's a small screw that releases a cover over the valves. There are two fibre hexagons that move in the flow. My pump body has some deep grooves worn by the corners in the circular recess...
Also... Is there a way to seperate the top without trashing the new diaphragm I fitted? It seems to be stuck like the proverbial to a blanket!?
Andrew, it's the top half of the pump I need. It's been a month or three since I rebuilt the pump and it seemed to be ok, but from memory, there's a small screw that releases a cover over the valves. There are two fibre hexagons that move in the flow. My pump body has some deep grooves worn by the corners in the circular recess...
Also... Is there a way to seperate the top without trashing the new diaphragm I fitted? It seems to be stuck like the proverbial to a blanket!?