02-05-2019, 11:31 AM
(This post was last modified: 02-05-2019, 11:33 AM by Steve Jones.)
(02-05-2019, 11:13 AM)Ruairidh Dunford Wrote:(02-05-2019, 10:17 AM)Chris KC Wrote: Re oil filler tube if it's putting up a fight turn on the 'shaft' not the top or you might separate the two. Wrap a bit of leather (e g. old glove) around it and grip on that with mole grips. Yes a bit of gentle heat on the ally may help.
I use one of these for stubborn fillers!
https://www.toolstation.com/strap-wrench...gLRpPD_BwE
Me too. If you do use grips/moles, be very careful as the tube can easily be crushed/distorted. Don't ask me how I know this


Steve