26-04-2019, 03:39 PM
The wider axle on my short chassis just has extra lugs welded on inboard of the old ones.
I think - the car isn't here - that the old lugs have been removed, and a longer pin goes into the original holes in the axle ends, held there by the usual cotter.
There is a spacer between the axle end and the spring.
A neat solution, but an (almost) irreversible mod to the axle case.
Simon
I think - the car isn't here - that the old lugs have been removed, and a longer pin goes into the original holes in the axle ends, held there by the usual cotter.
There is a spacer between the axle end and the spring.
A neat solution, but an (almost) irreversible mod to the axle case.
Simon