20-04-2019, 06:16 PM
ok, thankyou all. lots of things for me to check next visit down - I have made a list! Fuel is quite fresh so can be discounted I think. I did change the condenser over for a new one and seem to remember that it was left on. Can one "test" a condenser?
So, check all four cam lobes points opening.
If 6V coil is showing resistance across the poles of 1.8/1.9, can that signify all being well, or is there another test I need to perform?
So, check all four cam lobes points opening.
If 6V coil is showing resistance across the poles of 1.8/1.9, can that signify all being well, or is there another test I need to perform?