23-10-2017, 07:02 PM
"Getting the wheel off the drop arm is one of the notoriously difficult jobs on the Seven.
DO NOT HIT THE END OF THE SPINDLE
It is soft and the gear is very tight."
My solution was to turn a protective cap for the end of the spindle, you can then use a three legged puller, the gear is still bloody tight on the shaft but a sharp blow to the end of the puller usually frees it, and with the protective cap no damage done.
DO NOT HIT THE END OF THE SPINDLE
It is soft and the gear is very tight."
My solution was to turn a protective cap for the end of the spindle, you can then use a three legged puller, the gear is still bloody tight on the shaft but a sharp blow to the end of the puller usually frees it, and with the protective cap no damage done.
Black Art Enthusiast