07-04-2019, 05:04 PM
Some time ago I entered many posts about a dynamo that I failed despite much advice
to generate.
Just moved house so A7 work stalled.
However while moving I asked a friend to look at the Dynamo.
ITS WORKING 10 amps produced.
The next issue is the meshing of the bevel gears.
Some of you may remember the engine and other were in bits.
Any advise on fitting much appreciated.
Regard
Tim
to generate.
Just moved house so A7 work stalled.
However while moving I asked a friend to look at the Dynamo.
ITS WORKING 10 amps produced.
The next issue is the meshing of the bevel gears.
Some of you may remember the engine and other were in bits.
Any advise on fitting much appreciated.
Regard
Tim