05-04-2019, 04:31 PM
Further to last, to avoid your unit frazzling, check the depths of your 5 brass inserts on the TOP of the accuspark distributor cap.
I've just realised one of mine is far deeper and had scorch marks... the acorns had given good connection except with this one, which wouldn't have been obviously evident dealing with new kit.
The silicone leads dont come out with the brass pins to stuff down the centre of the lead when fitting an acorn, but I think they do need something (a bit of copper wire fine?) as the centre stuff is too fragile [for friction clamp between a brass disc and the brass base] for more than a couple of doings up/openings when one faffs...
I've just realised one of mine is far deeper and had scorch marks... the acorns had given good connection except with this one, which wouldn't have been obviously evident dealing with new kit.
The silicone leads dont come out with the brass pins to stuff down the centre of the lead when fitting an acorn, but I think they do need something (a bit of copper wire fine?) as the centre stuff is too fragile [for friction clamp between a brass disc and the brass base] for more than a couple of doings up/openings when one faffs...